1,272 data sheets · Australian catalogue
Belimo data sheets & technical submissions
Every Belimo product we hold for the Australian market, with its data sheet. Pick the products on your schedule and the builder assembles the technical submission for you.
Build a Belimo submission freeBelimo product ranges we hold
Examples from our Belimo library
- Differential pressure switch, 200...1000 Pa, Switch01APS-101
- Thermal energy meter, AC/DC 24 V, DN 25, 3.5 m³/h, PN 2522PE-1UE
- Rotary actuator, 20 Nm, AC/DC 24 V, 2...10 V, 90 s, IP54, F05SR24A-SR-5
- Contact temperature sensor passive, NTC10k (10k2), Probe diameter 6 mm, Cable 2 m, 2-wire01ST-1L3
- Globe valve actuator, 4500 N, AC/DC 24 V, 2...10 V, 150 s, Stroke 50 mm, IP54RV24A-SR
- Flow sensor, AC/DC 24 V, DN 80, FS 16.7 l/s, PN 2522PF-1UK
What a reviewer expects in the submission
- Product technical data for every item, keyed to the specification schedule and drawings
- Evidence of compliance with the AS/NZS standards the worksection nominates
- WaterMark certification for plumbing & drainage products, and WELS registration for water-using products, where applicable
- Shop drawings where the worksection calls for them
- Samples or prototypes when the specification requires visual approval
- Warranties and operation & maintenance information
Build your Belimo technical submission
List the Belimo products on your schedule — or upload the worksection — and the builder finds the data sheets, adds a cover and transmittal, and lets you refine it in chat. First packages are free.
Start freeCommon questions
Where do I find Belimo data sheets for an Australian project?
Our Australian catalogue holds 1,272 Belimo data sheets, including Characterised Control Valves, Valve Actuators, Duct Sensors (Air). Tell the Submittal.app builder the products on your schedule and it pulls the matching Belimo data sheets into your technical submission.
What goes in a technical submission for Belimo products?
The product data sheet for each item, keyed to the schedule and drawings, plus whatever the specification calls up — usually evidence of AS/NZS compliance, WaterMark or WELS where it applies, shop drawings, samples and warranties. Check the NATSPEC worksection for what your project nominates.
Is Belimo nominated in my specification?
The specification's nominated products always govern. If Belimo is listed, use it or submit an equal with a substitution request; if it is not, confirm with the reviewer before you commit.