732 data sheets · Australian catalogue
Enware data sheets & technical submissions
Every Enware product we hold for the Australian market, with its data sheet and NATSPEC worksection. Pick the products on your schedule and the builder assembles the technical submission for you.
Build a Enware submission freeEnware product ranges we hold
NATSPEC worksections
Where Enware products sit in an Australian specification.
- 0812 Tapware711 products
Examples from our Enware library
- Spare Parts: Ultra Rinse® Food Service - Soft Rinse Trigger Spray
- WB - Hot Hob Stuffing Box Assembly
- Oras Electra Metal Free Sensor Mixer Tap - 3V Battery
- Oras Safira Sink Mixer
- Oras: Safira - In-Wall Compact Shower Mixer (Red&Blue Indicators/Yellow&Blue Indicators)
- Smart Flow Hub Cabinet
- Screw Operated 15mm Cistern Tap with Cover - Jumper Valve - Chrome PlatedVP358
- Pill Shaped Wash Basin 500mmWB-BSNTYPC-P00
- Detention: Ceiling Mounted Shower RoseDET664
- DET601 with Hard Spring - No Ball ValveDET601HSNBV
- ComLab: Isolation Ball Valve - Dry Services - 15mm M/FLCN178
- ComLab: 2-Way Wall Bulkhead Fitting - Dry Services - 15mmLCN179
What a reviewer expects in the submission
- Product technical data for every item, keyed to the specification schedule and drawings
- Evidence of compliance with the AS/NZS standards the worksection nominates
- WaterMark certification for plumbing & drainage products, and WELS registration for water-using products, where applicable
- Shop drawings where the worksection calls for them
- Samples or prototypes when the specification requires visual approval
- Warranties and operation & maintenance information
Build your Enware technical submission
List the Enware products on your schedule — or upload the worksection — and the builder finds the data sheets, adds a cover and transmittal, and lets you refine it in chat. First packages are free.
Start freeCommon questions
Where do I find Enware data sheets for an Australian project?
Our Australian catalogue holds 732 Enware data sheets, including Tapware, Plumbing, Grab Rails & Support. Tell the Submittal.app builder the products on your schedule and it pulls the matching Enware data sheets into your technical submission.
What goes in a technical submission for Enware products?
The product data sheet for each item, keyed to the schedule and drawings, plus whatever the specification calls up — usually evidence of AS/NZS compliance, WaterMark or WELS where it applies, shop drawings, samples and warranties. Check the NATSPEC worksection for what your project nominates.
Is Enware nominated in my specification?
The specification's nominated products always govern. If Enware is listed, use it or submit an equal with a substitution request; if it is not, confirm with the reviewer before you commit.