DIV 07 · THERMAL & MOISTUREROOFINGCUT SHEET INDEXED

Carlisle SynTecHP-X Fasteners and isoweld Fastening Plates

Carlisle SynTec Roofing Fastener and Isoweld Plate System (Roofing Fasteners). Model HP-X. Compatible with TPO, PVC, and KEE HP roofing membranes; Typical pull-out value: 710 lbf (3158 N) on 22-gauge steel deck

Add to a submittalDownload cut sheet

Free to start · No card required · The agent pulls this cut sheet in automatically

PDFHP-X-Fasteners-and-isoweld-Fastening-Plates.pdfData sheet
Carlisle SynTec HP-X Fasteners and isoweld Fastening Plates cut sheet — first page
Official manufacturer data sheetOpen PDF ↗
Manufacturer
Carlisle SynTec
Catalog no.
HP-X Fasteners and isoweld Fastening Plates
Product type
Roofing
MasterFormat
07 50 00
Cut sheet
PDF · manufacturer current

Product details

Catalog numberHP-X Fasteners and isoweld Fastening Plates
DescriptionCarlisle SynTec Roofing Fastener and Isoweld Plate System (Roofing Fasteners). Model HP-X. Compatible with TPO, PVC, and KEE HP roofing membranes; Typical pull-out value: 710 lbf (3158 N) on 22-gauge steel deck
Minimum penetration3/4" (19 mm) for steel, 1" (25 mm) for wood; Non-penetrating system with symmetrical load distribution. material: Steel (20-gauge or 22-gauge) or Wood (CDX plywood)
Connection size2" to 14" (50 mm to 355 mm)
End connectionIsoweld induction welding
MountingMechanical fastening with induction welding
DimensionsThread Length: Full, 3" (75 mm), or 4" (100 mm)
  • Official cut sheet, indexed
  • Auto-matched to your schedule
  • Cover + TOC, one click

From fixture schedule to submittal in minutes.

How the Builder works →
  1. 01

    Describe the job

    Paste a fixture schedule, upload a spec section, or just list catalog numbers and quantities.

  2. 02

    The agent matches & assembles

    Products are matched from the indexed library and current cut sheets are pulled into a formatted package with cover and TOC.

  3. 03

    Share for review

    Send one link for sign-off, then roll the approved package into a quote or PO without retyping a part number.

More from Carlisle SynTec

All 328 cut sheets →
Browse every manufacturer in the cut sheet library →

Put the HP-X Fasteners and isoweld Fastening Plates in a submittal package.

Describe the job and the AI agent builds the whole package — cut sheets pulled, schedule matched, cover and TOC included.

Get started freeNo card required