DIV 09 · FINISHESSTEEL FRAMING / DRYWALLCUT SHEET INDEXED

ClarkDietrichRedHeader Lite

ClarkDietrich Pre-engineered header and jamb system (Structural Steel Framing). Model 250RHL250-33, 250RHL250-43, 362RHL250-33, 362RHL250-43, 400RHL250-33, 400RHL250-43, 600RHL250-33, 600RHL250-43. One-piece headers and jambs replace conventional built-up jambs and box headers; Available in 33 mil (20 gauge) and 43 mil (18 gauge) thicknesses; Yield strength (Fy) is 33 ksi for all listed models; Header lengths must be ordered 1/2" shorter than opening width. material: Steel (CP90 coating per ASTM A1003/AISI S240)

Add to a submittalDownload cut sheet

Free to start · No card required · The agent pulls this cut sheet in automatically

PDFRedHeader-Lite.pdfData sheet
Official manufacturer data sheetOpen PDF ↗
Manufacturer
ClarkDietrich
Catalog no.
RedHeader Lite
Product type
Steel Framing / Drywall
MasterFormat
09
Cut sheet
PDF · manufacturer current

Product details

Catalog numberRedHeader Lite
DescriptionClarkDietrich Pre-engineered header and jamb system (Structural Steel Framing). Model 250RHL250-33, 250RHL250-43, 362RHL250-33, 362RHL250-43, 400RHL250-33, 400RHL250-43, 600RHL250-33, 600RHL250-43. One-piece headers and jambs replace conventional built-up jambs and box headers; Available in 33 mil (20 gauge) and 43 mil (18 gauge) thicknesses; Yield strength (Fy) is 33 ksi for all listed models; Header lengths must be ordered 1/2" shorter than opening width. material: Steel (CP90 coating per ASTM A1003/AISI S240)
End connectionRHLC Header Bracket or EasyClip S-Series clips
FinishCP90; moun
  • Official cut sheet, indexed
  • Auto-matched to your schedule
  • Cover + TOC, one click

From fixture schedule to submittal in minutes.

How the Builder works →
  1. 01

    Describe the job

    Paste a fixture schedule, upload a spec section, or just list catalog numbers and quantities.

  2. 02

    The agent matches & assembles

    Products are matched from the indexed library and current cut sheets are pulled into a formatted package with cover and TOC.

  3. 03

    Share for review

    Send one link for sign-off, then roll the approved package into a quote or PO without retyping a part number.

More from ClarkDietrich

All 256 cut sheets →
Browse every manufacturer in the cut sheet library →

Put the RedHeader Lite in a submittal package.

Describe the job and the AI agent builds the whole package — cut sheets pulled, schedule matched, cover and TOC included.

Get started freeNo card required