DIV 07 · THERMAL & MOISTUREROOFINGCUT SHEET INDEXED

ElevatePRE-6 - ROOF EDGE WITH FASCIA METAL BY OTHERS

Elevate Roof Edge with Fascia Metal (Roofing Detail). Model PRE-6. Maximum warranty of 30 years; Requires 9" (229 mm) Quickseam Formflash extending to within ¼" (6 mm) of metal edge; Wood nailer must meet 200 lb per linear foot minimum; Lap sealant required along upslope edge if roof slope is 1" (25 mm) per foot or greater. material: RubberGard Platinum EPDM Membrane, Hot Dipped Galvanized Roof Nails, Wood Nailer

Add to a submittalDownload cut sheet

Free to start · No card required · The agent pulls this cut sheet in automatically

PDFPRE-6---ROOF-EDGE-WITH-FASCIA-METAL-BY-OTHERS.pdfData sheet
Elevate PRE-6 - ROOF EDGE WITH FASCIA METAL BY OTHERS cut sheet — first page
Official manufacturer data sheetOpen PDF ↗
Manufacturer
Elevate
Catalog no.
PRE-6 - ROOF EDGE WITH FASCIA METAL BY OTHERS
Product type
Roofing
MasterFormat
07
Cut sheet
PDF · manufacturer current

Product details

Catalog numberPRE-6 - ROOF EDGE WITH FASCIA METAL BY OTHERS
DescriptionElevate Roof Edge with Fascia Metal (Roofing Detail). Model PRE-6. Maximum warranty of 30 years; Requires 9" (229 mm) Quickseam Formflash extending to within ¼" (6 mm) of metal edge; Wood nailer must meet 200 lb per linear foot minimum; Lap sealant required along upslope edge if roof slope is 1" (25 mm) per foot or greater. material: RubberGard Platinum EPDM Membrane, Hot Dipped Galvanized Roof Nails, Wood Nailer
Mounting1¼" (32 mm) Hot Dipped Galvanized Roof Nails at 4" (102 mm) O.C. Max
Dimensions9" (229 mm) Quickseam Formflash, 5" (127 mm) Quickseam Flashing
ComplianceANSI/SPRI ES-
  • Official cut sheet, indexed
  • Auto-matched to your schedule
  • Cover + TOC, one click

From fixture schedule to submittal in minutes.

How the Builder works →
  1. 01

    Describe the job

    Paste a fixture schedule, upload a spec section, or just list catalog numbers and quantities.

  2. 02

    The agent matches & assembles

    Products are matched from the indexed library and current cut sheets are pulled into a formatted package with cover and TOC.

  3. 03

    Share for review

    Send one link for sign-off, then roll the approved package into a quote or PO without retyping a part number.

More from Elevate

All 3429 cut sheets →
Browse every manufacturer in the cut sheet library →

Put the PRE-6 - ROOF EDGE WITH FASCIA METAL BY OTHERS in a submittal package.

Describe the job and the AI agent builds the whole package — cut sheets pulled, schedule matched, cover and TOC included.

Get started freeNo card required