DIV 07 · THERMAL & MOISTUREROOFINGCUT SHEET INDEXED

ElevateT-04 - TERMINATION WITH REGLET COUNTER-FLASHING AND TERMINAT

Elevate Termination with Reglet Counter-Flashing and Termination Bar (Roofing Termination). Model T-04. Material: RubberGard EPDM or Max EPDM; Counter-flashing: 24 gauge pre-finished steel or .032" min aluminum

Add to a submittalDownload cut sheet

Free to start · No card required · The agent pulls this cut sheet in automatically

PDFT-04---TERMINATION-WITH-REGLET-COUNTER-FLASHING-AND-TERMINAT.pdfData sheet
Elevate T-04 - TERMINATION WITH REGLET COUNTER-FLASHING AND TERMINAT cut sheet — first page
Official manufacturer data sheetOpen PDF ↗
Manufacturer
Elevate
Catalog no.
T-04 - TERMINATION WITH REGLET COUNTER-FLASHING AND TERMINAT
Product type
Roofing
MasterFormat
07
Cut sheet
PDF · manufacturer current

Product details

Catalog numberT-04 - TERMINATION WITH REGLET COUNTER-FLASHING AND TERMINAT
DescriptionElevate Termination with Reglet Counter-Flashing and Termination Bar (Roofing Termination). Model T-04. Material: RubberGard EPDM or Max EPDM; Counter-flashing: 24 gauge pre-finished steel or .032" min aluminum
SealantContinuous bead of Elevate AP Sealant
Membrane thickness45 mil (up to 15-year warranty) or 60 mil (up to 25-year warranty). material: RubberGard EPDM or Max EPDM
MountingSurface mounted on masonry/concrete walls or curbs
DimensionsCounter-flashing face 3" (76.2 mm) min; Termination bar gap 1/4" (6.35 mm); Fastener spacing 12" (304.8 mm) O.C. max
ComplianceSMACNA Re
  • Official cut sheet, indexed
  • Auto-matched to your schedule
  • Cover + TOC, one click

From fixture schedule to submittal in minutes.

How the Builder works →
  1. 01

    Describe the job

    Paste a fixture schedule, upload a spec section, or just list catalog numbers and quantities.

  2. 02

    The agent matches & assembles

    Products are matched from the indexed library and current cut sheets are pulled into a formatted package with cover and TOC.

  3. 03

    Share for review

    Send one link for sign-off, then roll the approved package into a quote or PO without retyping a part number.

More from Elevate

All 3429 cut sheets →
Browse every manufacturer in the cut sheet library →

Put the T-04 - TERMINATION WITH REGLET COUNTER-FLASHING AND TERMINAT in a submittal package.

Describe the job and the AI agent builds the whole package — cut sheets pulled, schedule matched, cover and TOC included.

Get started freeNo card required