DIV 07 · THERMAL & MOISTUREROOFINGCUT SHEET INDEXED

ElevateTIS 2122 - ELEVATE PVC KEE XR FLEECE-BACKED MINIMUM THICKNES

Elevate PVC Roofing Membrane (Roofing Membrane). Model TIS 2122. Minimum thickness options: 50 mil, 60 mil, and 80 mil; Meets or exceeds ASTM D 4434 Type III requirements; Suitable for low-slope roofing and waterproofing applications; Not compatible with Elevate MAX PVC or PVC XR Membranes. material: Thermoplastic Polyvinyl Chloride (PVC) with polyester weft-inserted reinforcement and 5.5 oz non-woven spunbonded polyester fleece backing

Add to a submittalDownload cut sheet

Free to start · No card required · The agent pulls this cut sheet in automatically

PDFTIS-2122---ELEVATE-PVC-KEE-XR-FLEECE-BACKED-MINIMUM-THICKNES.pdfData sheet
Elevate TIS 2122 - ELEVATE PVC KEE XR FLEECE-BACKED MINIMUM THICKNES cut sheet — first page
Official manufacturer data sheetOpen PDF ↗
Manufacturer
Elevate
Catalog no.
TIS 2122 - ELEVATE PVC KEE XR FLEECE-BACKED MINIMUM THICKNES
Product type
Roofing
MasterFormat
07
Cut sheet
PDF · manufacturer current

Product details

Catalog numberTIS 2122 - ELEVATE PVC KEE XR FLEECE-BACKED MINIMUM THICKNES
DescriptionElevate PVC Roofing Membrane (Roofing Membrane). Model TIS 2122. Minimum thickness options: 50 mil, 60 mil, and 80 mil; Meets or exceeds ASTM D 4434 Type III requirements; Suitable for low-slope roofing and waterproofing applications; Not compatible with Elevate MAX PVC or PVC XR Membranes. material: Thermoplastic Polyvinyl Chloride (PVC) with polyester weft-inserted reinforcement and 5.5 oz non-woven spunbonded polyester fleece backing
End connectionHeat welded seams
FinishWhite, Tan, Gray
MountingAdhered or mechanically attached
DimensionsRolls: 76" x 100', 10' x 100', 76" x 90',
  • Official cut sheet, indexed
  • Auto-matched to your schedule
  • Cover + TOC, one click

From fixture schedule to submittal in minutes.

How the Builder works →
  1. 01

    Describe the job

    Paste a fixture schedule, upload a spec section, or just list catalog numbers and quantities.

  2. 02

    The agent matches & assembles

    Products are matched from the indexed library and current cut sheets are pulled into a formatted package with cover and TOC.

  3. 03

    Share for review

    Send one link for sign-off, then roll the approved package into a quote or PO without retyping a part number.

More from Elevate

All 3429 cut sheets →
Browse every manufacturer in the cut sheet library →

Put the TIS 2122 - ELEVATE PVC KEE XR FLEECE-BACKED MINIMUM THICKNES in a submittal package.

Describe the job and the AI agent builds the whole package — cut sheets pulled, schedule matched, cover and TOC included.

Get started freeNo card required