DIV 07 · THERMAL & MOISTUREROOFINGCUT SHEET INDEXED

GAFdrill tec cd 10 fastener (7 17)drill tec cd 10 fastener (7 17)

GAF hammer-in fastener (Drill-Tec). Model CD-10. Non-threaded fastener for securing insulation and single-ply membrane to structural concrete; 45° point angle with split diameter of .270"/.277" (6.86/7.04 mm); Requires 7/32" (5.56 mm) predrilled hole and 1" (25.4 mm) minimum embedment; Typical pull-out values in 3000 psi concrete are 800 lbs to 1200 lbs (363 kg - 544 kg). material: hard carbon steel

Add to a submittalDownload cut sheet

Free to start · No card required · The agent pulls this cut sheet in automatically

PDFdrill-tec-cd-10-fastener-7-17.pdfData sheet
Official manufacturer data sheetOpen PDF ↗
Manufacturer
GAF
Catalog no.
drill tec cd 10 fastener (7 17)
Product type
Roofing
MasterFormat
07
Cut sheet
PDF · manufacturer current

Product details

Catalog numberdrill tec cd 10 fastener (7 17)
DescriptionGAF hammer-in fastener (Drill-Tec). Model CD-10. Non-threaded fastener for securing insulation and single-ply membrane to structural concrete; 45° point angle with split diameter of .270"/.277" (6.86/7.04 mm); Requires 7/32" (5.56 mm) predrilled hole and 1" (25.4 mm) minimum embedment; Typical pull-out values in 3000 psi concrete are 800 lbs to 1200 lbs (363 kg - 544 kg). material: hard carbon steel
FinishCR-10 corrosion-resistant coating
Mountinghammer-in
Dimensions2" - 12" (51 mm - 305 mm) lengths; Head Diameter .435" (11.04 mm); Split Diameter .270"/.277" (6.86/7.04 mm); compliance
  • Official cut sheet, indexed
  • Auto-matched to your schedule
  • Cover + TOC, one click

From fixture schedule to submittal in minutes.

How the Builder works →
  1. 01

    Describe the job

    Paste a fixture schedule, upload a spec section, or just list catalog numbers and quantities.

  2. 02

    The agent matches & assembles

    Products are matched from the indexed library and current cut sheets are pulled into a formatted package with cover and TOC.

  3. 03

    Share for review

    Send one link for sign-off, then roll the approved package into a quote or PO without retyping a part number.

More from GAF

All 799 cut sheets →
Browse every manufacturer in the cut sheet library →

Put the drill tec cd 10 fastener (7 17) in a submittal package.

Describe the job and the AI agent builds the whole package — cut sheets pulled, schedule matched, cover and TOC included.

Get started freeNo card required