DIV 09 · FINISHESSTEEL FRAMING / DRYWALLCUT SHEET INDEXED

ClarkDietrichCD BlazeFrame RipTRAK 1&2 Deflection Allowable Loads

ClarkDietrich Deflection Track Connection (BlazeFrame). Model RipTRAK. Max total deflection of 1 inch (1/2" extension + 1/2" compression) or 2 inches (1" extension + 1" compression); Compatible with 2-1/2", 3-5/8", and 6" width RipTRAK systems; Allowable loads range from 25 lbs to 695 lbs depending on stud and track thickness; Requires minimum 2 fasteners spaced at 12" o.c.. material: Steel

Add to a submittalDownload cut sheet

Free to start · No card required · The agent pulls this cut sheet in automatically

PDFCD-BlazeFrame-RipTRAK-1-2-Deflection-Allowable-Loads.pdfData sheet
Official manufacturer data sheetOpen PDF ↗
Manufacturer
ClarkDietrich
Catalog no.
CD BlazeFrame RipTRAK 1&2 Deflection Allowable Loads
Product type
Steel Framing / Drywall
MasterFormat
09
Cut sheet
PDF · manufacturer current

Product details

Catalog numberCD BlazeFrame RipTRAK 1&2 Deflection Allowable Loads
DescriptionClarkDietrich Deflection Track Connection (BlazeFrame). Model RipTRAK. Max total deflection of 1 inch (1/2" extension + 1/2" compression) or 2 inches (1" extension + 1" compression); Compatible with 2-1/2", 3-5/8", and 6" width RipTRAK systems; Allowable loads range from 25 lbs to 695 lbs depending on stud and track thickness; Requires minimum 2 fasteners spaced at 12" o.c.. material: Steel
Connection size1" & 2" Max. Total Deflection
End connectionStud connection
MountingRipTRAK Clips (RTC) or No Clip
Dimensions2-1/2", 3-5/8", 6" width systems
Compliance1HR and 2HR Profiles.
  • Official cut sheet, indexed
  • Auto-matched to your schedule
  • Cover + TOC, one click

From fixture schedule to submittal in minutes.

How the Builder works →
  1. 01

    Describe the job

    Paste a fixture schedule, upload a spec section, or just list catalog numbers and quantities.

  2. 02

    The agent matches & assembles

    Products are matched from the indexed library and current cut sheets are pulled into a formatted package with cover and TOC.

  3. 03

    Share for review

    Send one link for sign-off, then roll the approved package into a quote or PO without retyping a part number.

More from ClarkDietrich

All 256 cut sheets →
Browse every manufacturer in the cut sheet library →

Put the CD BlazeFrame RipTRAK 1&2 Deflection Allowable Loads in a submittal package.

Describe the job and the AI agent builds the whole package — cut sheets pulled, schedule matched, cover and TOC included.

Get started freeNo card required