ClarkDietrich IBC2015 Drywall Studs CheckList
MASTER by ClarkDietrich. Cut sheet, part numbers and a one-click submittal — indexed and ready in Submittal.app.
ClarkDietrich Cold-Formed Steel Stud (Drywall Framing). Protective coating must conform to ASTM A653/A653M G40 or equivalent; Minimum base steel thickness shall not be less than 95% of design thickness; Members must be marked with rollformer ID, min thickness, yield strength, coating type, and 'NS' designation; Marking required at maximum 96 inches on center. material: Cold-formed steel (ASTM A1003/A1003M)
Build a submittal around the ClarkDietrich IBC2015 Drywall Studs CheckList in minutes — describe the job or paste your schedule and the agent pulls the current cut sheet into a formatted package you can share for review and get quoted, fast.
Product details
| Finish | Hot dipped galvanized (ASTM A653/A653M G40) or equivalent |
|---|---|
| Dimensions | Minimum base steel thickness 95% of design thickness |
| Compliance | IBC 2015, AISI S220, ASTM C645-13. |
Part numbers / catalog
How It Works
From schedule to submittal package in minutes, not days.
Describe your schedule
Paste a fixture schedule, upload a spec section, or just tell the Submittal Builder what the job calls for — catalog numbers, ClarkDietrich IBC2015 Drywall Studs CheckList series, quantities.
AI matches products & assembles the package
The agent matches ClarkDietrich IBC2015 Drywall Studs CheckList products from our indexed library, pulls the current cut sheets, and assembles a formatted submittal package with a cover page and table of contents.
Share for review
Send a review link to the design team or GC for sign-off — and when you're ready, roll the approved package into a quote or PO without retyping a part number.
Add the ClarkDietrich IBC2015 Drywall Studs CheckList to a submittal
Describe the job and the AI agent builds the whole package — cut sheets pulled, schedule matched, cover and TOC included. Free to start.