Watts 3007
Plumbing by Watts. Cut sheet, part numbers and a one-click submittal — indexed and ready in Submittal.app.
Watts Dielectric Union (Dielectric Unions). Model 3007. Rated to 180°F (82°C) at 250psi (17.2 bar); Factory certified to withstand 600 volts on a dry line with no flashover; Prevents accelerated corrosion due to galvanic and stray current; Standard gasket is Buna; optional EPDM gasket available for steam/hot water up to 300°F. material: Gray Iron, Malleable Iron, Steel, Brass, Bronze, Zinc
Build a submittal around the Watts 3007 in minutes — describe the job or paste your schedule and the agent pulls the current cut sheet into a formatted package you can share for review and get quoted, fast.
Product details
| Connection size | 1/2" x 3/8", 3/4" x 1/2" |
|---|---|
| End connection | Male iron pipe thread to female solder |
| Pressure Rating | 250psi (17.2 bar) |
| Dimensions | 1/2" x 3/8": A=1.5 in, B=2.625 in; 3/4" x 1/2": A=1.625 in, B= |
Part numbers / catalog
How It Works
From schedule to submittal package in minutes, not days.
Describe your schedule
Paste a fixture schedule, upload a spec section, or just tell the Submittal Builder what the job calls for — catalog numbers, Watts 3007 series, quantities.
AI matches products & assembles the package
The agent matches Watts 3007 products from our indexed library, pulls the current cut sheets, and assembles a formatted submittal package with a cover page and table of contents.
Share for review
Send a review link to the design team or GC for sign-off — and when you're ready, roll the approved package into a quote or PO without retyping a part number.
Add the Watts 3007 to a submittal
Describe the job and the AI agent builds the whole package — cut sheets pulled, schedule matched, cover and TOC included. Free to start.